Courtyard Spouts

Dimensions and Features

Courtyard spouts feature a copper construction with a copper scroll forming the support. Scroll and support are secured with a copper strap, and the entire assembly is brazed and soldered with food and water safe materials.

Connection is solid brass, threaded in 1/2 NPT for the small spouts and 3/4 NPT for the large spouts.

Spout Connection Snip
Connection Piece Snip

Spouts have a support pin made from stainless steel at the face touchpoint on the scroll. The scroll is slightly bendable, allowing it to be rotated slightly to allow for variations in the mounting surface. When installed, the scroll should gently press against the surface, not try to pull away.

Bucket pin is made from copper, brazed, and can support a small bucket with water, provided the support scroll is mounted securely. Water is very heavy; keep this in mind if hanging a bucket.

Support Pin Snip
Bucket Pin Snip 3

Measurement is from the tip of the spout to the beginning of the brass connection fitting and the top of the body to the bottom of the scroll. Dimensions are nominal and vary from piece to piece.

Spouts are handmade and vary from piece to piece; we make sure to match sets to fill orders, both in alignment and patina. If you order a sample, you may need to return it to match the remaining pieces. Spouts are very customizable; if you have special requirements, please ask.

Small CY
Large CY
Courtyard Spout Overlay A1